Using the Write Block tool Using the Write Block tool, you can create a drawing file from a block or objects. You can later insert this drawing file as a block into another drawing. The procedure to create a drawing file using blocks is discussed in the following example. Example: Start a new drawing file […]
Using the Write Block tool Read More »
Inserting Blocks in a Table You can insert blocks in a table and fit inside the table cells. Note that you cannot insert Annotative blocks in a table. The following example shows you to insert a block in a table. Example: Create three blocks as shown below. Click on Annotate > Table > Table
Inserting Blocks in a Table Read More »
Blocks in AutoCAD In this chapter, you will learn to do the following: Create and insert Blocks Create Annotative Blocks Explode, purge Blocks Use the Divide tool Use the Design Center and Tool Palettes to insert Blocks Insert Multiple Blocks Edit Blocks Create Blocks using the Write
Island Detection tools While creating hatch lines, the island detection tools help you detect the internal areas of a drawing. Example: Create the drawing as shown below. Do not apply dimensions. Click Home > Draw > Hatch on the ribbon. Select ANSI31 from the Pattern panel. Expand the Options panel and select
AutoCAD Island Detection tools Read More »
Section Views in AutoCAD In this chapter, you will learn the following tools: Create Section Views Set Hatch Properties Use Island Detection tools Create text in Hatching Edit Hatching Section Views In this chapter, you will learn to create section views, which are created by cutting an object along an
Section Views in AutoCAD Read More »
Dimensional Constraints Dimensional constraints are applied to a drawing after applying the Geometric constraints. They are used to control the size and position of the objects in a drawing. You can apply the dimensional constraints using the tools available in the Dimensional panel of the Parametric ribbon. Click the inclined arrow on the Dimensional
Dimensional Constraints Read More »
Parametric Tools in AutoCAD In this chapter, you will learn to do the following: Apply Geometric and Dimensional Constraints Create Equations using the Parameter Manager Create Inferred Constraints Parametric Tools Parametric tools are one of the main advancements in CAD/CAM/CAE. Using the parametric tools, you can define the shape and size of
Parametric Tools in AutoCAD Read More »
