Revit Adding the Inside Shapes

Adding the Inside Shapes

• Open the WU2-1 file. Save the file as WU2-2.
• Start by adding the bottom rectangular shape as shown.

Use the offset and trim tools to draw the first rectangle.

• Next you will copy the rectangle vertically.

Select the rectangle, then click on the Copy tool in the Modify panel.

Copy it vertically 2′-6″.

You can type in the distance as you copy.

Bottom Rectangle Location

Rectangle Copied

Copy Tool

• Next create the Triangle and the Hexagon.

You will use the Inscribed Polygon tool for the Triangle and the Circumscribed Polygon tool for the

Hexagon.

 

 

 

Inscribed Polygon Tool

• Draw the Triangle at a 10″

  radius.

After clicking on the tool, set the correct number of sides.

Locate the Triangle as shown.

Note: You may wish to use reference planes to help locate the center. A circle has been added to help locate the triangle.

• Draw the Hexagon at a 7 1/2″ radius.

After clicking on the tool, set the correct number of sides.

Locate the Hexagon as shown.

Triangle Location

• Draw the large circle as shown.

Hexagon Location

• The inside shapes are completed.

Large Circle Location

• This is the end of Part 2. Save your file as WU1-2.